The Millennia HV-35 is an API 500 series compatible instrument and microphone preamplifier based on Millennia's outstand HV series of stand alone microphone preamps.
Features
- Continuously variable gain control
- Front panel instrument input
- DC coupled ribbon mic with 10dB gain boost setting
- 80 Hz rolloff filter
- 48V phantom power
- 15 dB Pad
- Polarity flip
- API 500 series compatible format
Sepcification
- Minimum Gain - 8.5 dB
- Maximum Gain (1.5 dB per step, 36 steps) - 65 dB (up to 75 dB on request)
- Frequency Response (+0 / -3 dB) - sub 3 Hz to beyond 300 kHz
- Noise 60 dB Gain, 10 Hz - 30 kHz, Inputs common) - -133 dB EIN
- Total Harmonic Distortion + Noise (35 dB Gain, 10 Hz - 20 kHz bandwidth, +27 dBu Out) - < .001%, Typ. < .0005% (< 5 ppm)
- Intermodulation Distortion ((50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out) - < .0009%
- Phase Response (35 dB Gain, 50 Hz - 20 kHz bandwidth, +27 dBu Out) - < 2 degrees deviation
- Common Mode Rejection Ratio (35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.) - > 65 dB, Typ > 85 dB
- Slew Rate (35 dB Gain, +27 dBu Out) - > 25 Volts per microsecond
- Maximum Input Level (20 Hz - 40 kHz) - +23 dBu (no attenuator pads required)
- Maximum Output Level (20 Hz - 40 kHz) - +32 dBu
- Phantom Input Impedance (1 kHz) - 6,750 ohms
- Output Impedance - 24.3 Ohms (x2)
- Phantom Powering - +48 V dc, +/- 2 V dc
- Dimensions - 381mm x 133mm x 152mm (WDH)
- Shipping Weight - 1.36kg
© Giraffe Audio Limited. All Rights Reserved.