Lauten Audio Tom Mic Front

Lauten Audio Tom Mic

Lauten Audio Tom Mic

  • World's first large diaphragm condenser microphone specifically for Toms
  • Equipped with Lauten Audio’s newly designed Supercardioid capsule 
  • Captures pure, high-definition rack and floor tom sonics with maximum impact and tone
  • Onboard analog sound-shaping
Normally ships 1-3 days
Lauten Audio Tom Mic


Tom Mic’s tom-tailored frequency response captures each rack and floor tom with drummer-perspective speed, power, and tone, making EQ an afterthought rather than a must-have.


Lauten Audio’s bleed-blocking head design and dual bias circuitry work together to provide Tom Mic with up to 28dB of off-axis rejection. This means crisp, clear tom sounds with far less cymbal bleed than a traditional dynamic or condenser microphone.


Whether stand or rim-mounted, Tom Mic’s newly designed Supercardioid capsule is hand-tuned and vibration-resistant to ensure a powerful balance of transient, body, and tone while minimizing inharmonic overtones from neighboring drums and tuning inconsistencies.


Each Tom Mic has a solid brass headframe and mildew-resistant dust filter to protect against stick hits, dust, and debris, whether in the studio or on stage.


Because of its unique design, Tom Mic is ideal for a wide array of placement positions while minimizing off-axis sounds. From the slap and isolation of proximity to the lifelike sonics of separation, each placement position offers a wealth of new sonic possibilities. It’s even great on resonant heads as well.


Tom Mic’s filters impact the overall performance of the microphone and play a critical role in its overall sonic versatility.  

  • Flat High Cut – Tom Mic’s frequency response boosts from 1kHz-2kHz, dips sharply at 3kHz for snap, then rises around 5k for smack and attack. Sensitivity is also reduced from 9kHz through 14kHz to minimize the sizzle and harshness of cymbal bleed. 
  • 12kHz High Cut – Reduce perceived attack from overly bright tom strikes for a slightly rounder and more balanced note. This setting is also helpful for bringing up the perceived body of a floor tom while further reducing bleed from the surrounding cymbal
  • 5kHz High Cut – Minimize bleed in harsh environments while preserving the essential impact and tone of a tom. This setting allows you to reintroduce presence and attack through post-EQ without accentuating unwanted high-frequency elements.
  • Flat Low Cut- Allow all low-frequency information generated by a rack or floor to pass through Tom Mic’s dual-bias circuitry unaltered.
  • 80Hz Low Cut – Gently reduce low-frequency buildup while improving perceived clarity from each note. This setting enables toms to stand out in a mix without sacrificing density and low end.  
  • 140Hz Low Cut – Significantly reduce low-frequency buildup while enhancing the perceived impact and clarity of each note. This setting is particularly useful in close-mic applications where toms need to assertively cut through a dense mix with precision and clarity.


  • Tom Mic
  • Articulating Swivel Mount
  • Cordura Padded Bag
  • Type: Side-address pressure gradient FET condenser 
  • Capsule: 32mm 
  • Polar Patterns: Super-Cardioid 
  • Freq. Response: 20Hz-20KHz 
  • High Pass Filter: Flat / 80Hz / 140Hz
  • Low Pass Filter:  Flat / 5kHz / 12kHz
  • Dynamic Range: 135dB minimum 
  • SPL Handling: >135DB (0.5%THD@1000Hz) 
  • Impedance: >150 ohms 
  • Self-noise level: < 15dB-A 
  • Signal-to-Noise Ratio:   79dB 
  • Sensitivity: -58.0dBV/Pa (0dB=1V/Pa 1KHz) 
  • Connector: 3-pin XLR 
  • Power: Requires 48v Phantom Power 
  • Dimensions:  127 x 60mm (mic only) 131 x 106mm (with mount)  
  • Weight: 348g (mic only) 450g (with mount) 

Need Assistance? We're Here to Help!

Personalised Product Guidance

Whether you're seeking specific details about a product, or require advice on how it integrates with your existing setup, we're readily available to assist. Our team of specialists is on hand to help you make an informed decision.

Custom Solutions and Consultation

If you're unable to find the information you need on our website, or wish to discuss custom solutions, please feel free to contact us. We provide consultation services designed to assist you in creating an ideal audio environment.

Competitive Quotations and Pricing

In addition to personalised advice, we also offer quotations for our products and services. If you're planning a project or considering a purchase and have found a better price elsewhere, let us know. We strive to offer competitive rates and will do our best to accommodate your budget. Email us your requirements and we will provide a detailed quote to help you plan your investment with clarity and confidence.

Contact Us

Email us now for tailored advice, bespoke quotations, and solutions that respect your budgetary considerations.