Eventide Powerfactor

PowerFactor will simultaneously power up to 3 Eventide Stompboxes plus up to four additional pedals.

10 outlets configured in 7 isolated sections
Toroidal transformer with additional magnetic field shielding
3 powerful DC sections with 400mA each, able to power three Eventide Factor pedals
Mounting Bracket included
Short circuit protection of all outlets
Advanced LED monitoring of each section
Temperature monitoring
115V/230V mains voltage selector switch
Durable steel enclosure with 2mm thick top
Size: 6.22” x 3.86” x 1.34”, 158mm x 98mm x 34mm (excl. rubber feet)
5-year warranty
13 Flex cables included:
2 x 4050 Flex 4 for Eventide stompboxes - 50cm (19”) w/5.5/2.5mm center positive DC-plug (green) right angle
1 x 4030 Flex 4 for Eventide stompboxes - 30cm (12”) w/5.5/2.5mm center positive DC-plug (green) right angle
3 x 1030 Flex 1 for Boss type 50cm (12”) with 5.5/2.1mm center negative DC-plug (black) right angle
2 x 1050 Flex 1 for Boss type 50cm (19”) with 5.5/2.1mm center negative DC-plug (black) right angle
1 x 2050 Flex 2 for Fulltone Octafuzz type 50cm (19”) with 5.5/2.1mm center positive DC-plug (red) right angle
1 x 5050 Flex 5 for EH/DOD type 50cm (19”) with 3.5mm tip positive mini-jack plug (black) right angle
1 x 6050 Flex 6 - 50cm (19”) with 9-volt type battery-clip (black)
1 x 1035 Split Flex – 30 (12”)& 50cm (19”) with 5.5/2.1mm center negative DC-plug (black) for powering two pedals from one outlet
1 x 1022 Stack Flex 1 - 50cm with 5.5/2.1mm center negative DC-plug (white/black) for merging two 9V to get 18V (for a maximum of 80mA)

Outlet Specifications:

· Outlet 1-4: 9V DC / 100mA each

· Outlet 5-6: 9 and 12V DC / 400mA

· Outlet 7-8: 9 and 12V DC / 400mA

· Outlet 9-10: 9 and 12V DC / 400mA