The large active range from PMC justly deserves the label of ‘no compromise’. Every element has been designed and manufactured purely for its performance and encompasses the smallest detail from individual cable choice through to hand selection of capacitors in the active crossover networks. This level of resolution cannot be achieved with standard technology and average tolerances.
For small to medium size recording, mixing or mastering rooms, MB2-A would be appropriate, with the XBD added for additional low frequency SPL.
You can find the MB2S-Ain the following studios: BBC Outside Broadcast Vehicle.
Technical Specification
- Amplifier Power per Channel: LF 325W, MF 120W, HF 120W
- Available Finishes: Neo Black
- Crossover Frequency: 380Hz & 3.8kHz
- Dimensions: H 870mm 34.25" W 380mm 14.96" D 535mm 21.06"
- Drive Units: LF 310mm PMC Radial™ driver, MF 75mm PMC fabric dome , HF 27mm fabric soft dome
- Effective ATL™ Length: 3m 10ft
- Impedance: 4 Ohm Nominal
- Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp)
- Recommended Amp Power: 200-800W
- Sensitivity: 91dB 1W 1m
- Useable Frequency Response: 20Hz-25kHz Peak SPL @ 1M: 124dB
- Weight: 49kg 108lbs
© Giraffe Audio Limited. All Rights Reserved.