Select polar pattern during mixdown or record in stereo
Pearl legendary rectangular capsule serves several purposes in TL 44. First of all, the capsules are mounted back-to-back and the XLR connextor is 5-pin with two discrete output channels.
Connect the two outputs to two mixer channels or two inputs on your soundcard. When recording a mono sound, such as vocals or a small acoustic instrument, direct one capsule to the sound source. By configuring your mixer/DAW accordingly, you can obtain cardioid, omni or figure-of-eight pattern characteristics, all continuously variable. And even during mixdown, after recording.
You can also position the TL 44 with its capsules angled 90 degrees from a stereo sound source and obtain a 180 degrees XY stereo image. Add to this a very flat frequency response with a neutral low end, and it's easy to see why the TL 44 is an ideal microphone for recording anything from a vocalist to a church organ.
The TL 44 is finished in black ED lacquer with an illuminating LED confirming 48v phantom power.
Package includes
Wooden box
Microphone shockmount 1930
Individual frequency graph
Frequency response
tl 44-graph
Specifications
Polar pattern Cardioid, omni, figure-of-eight (or anything in between) or 180° XY stereo
Sensitivity 16 mV/Pa
Frequency response 20Hz - 20kHz
Impedance 100 ohms
Operating Voltage 48 volts
Rec. load imp 1 K ohms
Current consumption 3.5 mA
Self noise 14 dBA
Max SPL 126 dB
Connector 5-pin XLR
Dimensions 145 x ø31 mm
Weight 260 g
© Giraffe Audio Limited. All Rights Reserved.