Ideal for professional facilities with live performance rooms, the DiGiGrid IOX audio interface features a unique I/O configuration: 12 mic/line inputs with broadcast/studio-quality preamps and 6 line outputs. With four customizable headphone outputs which allow individual mixes for each musician, the IOX delivers high-resolution monitoring whether you’re performing in the studio or listening in the control room. Plug the IOX into your SoundGrid network with a single Ethernet cable, and you will enter a new world of real-time tracking, mixing and monitoring. And that’s not all: With a SoundGrid DSP server on your network, you can run hundreds of SoundGrid-compatible plugins from Waves and other developers, fully integrated within your DAW, with latency of only 0.8 milliseconds.
General
- 12x mic/line inputs (XLR/TRS combo)
- 6x line outputs (TRS)
- 1x word clock I/O
- 2x SoundGrid RJ45 Ethernet ports
- 1x AC input
- 4x headphone outputs with analog level knobs
- 6x channel line outputs (TRS)
- 1U rack-mounted
- Supported sample rates: 44.1, 48, 88.2, 96, 176.4*, 192* kHz
- Clock synchronization via Word Clock input, SoundGrid (Sync over Ethernet), Internal
- Reset switch
- Multiple broadcast level format settings (jumpers on all analog I/Os)
Inputs
- Mic input impedance: 2K5 Ohms
- Phantom power: 48V
- Line input impedance: 8K0 Ohms
- Mic gain range: -20 to +60dB in 0.5dB steps
- Line gain range: -30 to +50dB in 0.5dB steps
- Mic maximum input level: +26dBu
- Line maximum input level: +36dBu
- Mic equivalent input noise: >-126dB (150 Ohm source, Gain +60dB)
- Frequency response: +/-0.5dB 20Hz to 20kHz
- Channel separation: Better than 90dB (40Hz to 15kHz)
Outputs
- Maximum line output level: +22dBu
- Residual line output noise: Frequency Response: +/-0.5dB 20Hz to 20kHz
- Line output impedance: 50 Ohms
- Channel separation: Better than 90dB (40Hz to 15kHz)
© Giraffe Audio Limited. All Rights Reserved.