Custom-designed with the control room in mind, the DiGiGrid IOC audio interface features a variety of connectivity options: 2 mic/line inputs with broadcast-grade preamps, 8 line inputs/outputs, 16 AES inputs/outputs, an ADAT input/output, plus two powerful headphone outputs. Plug into the SoundGrid network using a single Ethernet cable, and the IOC will open up a world of real-time tracking, mixing and monitoring, with super-low latency of only 0.8 milliseconds. With the DiGiGrid IOC and a SoundGrid DSP server, you can run hundreds of SoundGrid-compatible plugins from Waves and other developers, all fully integrated within your DAW.
General
- 8x line inputs (25-pin D-Con)
- 8x line outputs (25-pin D-Con)
- 16x AES/EBU I/O (2x 25-pin D-Con)
- 1x ADAT I/O (8 channels @ 48kHz; 4 channels @ 96kHz; 2 channels @ 192kHz*)
- 2x Mic inputs (XLR/TRS combo)
- 2x SoundGrid RJ45 Ethernet ports
- 1x Word clock I/O
- 1x AC input
- 2x headphone outputs with analog level knobs
- 1U rack-mounted
- Supported sample rates: 44.1, 48, 88.2, 96, 176.4*, 192* kHz
- Clock Synchronization via Word Clock input, AES/EBU, SoundGrid (SoE), Internal
- Reset switch
- Multiple broadcast level format settings (jumpers on all analog I/Os)
Inputs
- Mic input impedance: 2K5 Ohms
- Phantom power: 48V
- Line input impedance: 8K0 Ohms
- Mic gain range: -20 to +60dB in 0.5dB steps
- Line gain range: -30 to +50dB in 0.5dB steps
- Mic maximum input level: +26dBu
- Line maximum input level: +36dBu
- Mic equivalent input noise: >-126dB (150 Ohm source, Gain +60dB)
- Frequency response: +/-0.5dB 20Hz to 20kHz
- Channel separation: Better than 90dB (40Hz to 15kHz)
Outputs
- Maximum line output level: +22dBu
- Residual line output noise: Frequency Response: +/-0.5dB 20Hz to 20kHz
- Line output impedance: 50 Ohms
- Channel separation: Better than 90dB (40Hz to 15kHz)
© Giraffe Audio Limited. All Rights Reserved.