Millennia TD-1

Millennia TD-1

Millennia TD-1

£2,999.00
Portable Recording Channel
Normally ships 5-9 days
SKU
001161

Millennia's HV-3 solid state mic pre is renowned for its transparency and sonic realism. The Twin Topology DI input lets you switch between true Class A tube or discrete solid state circuitry. Capture the whole amp, from guitar or bass input to speaker output, with the Speaker Soak™ input. TD-1 is designed for both sonic realism and "shades of clean." Record dry, then use the two bands of NSEQ-2 mastering-grade equalization to add air or punch to the track or to clean up a muddy signal. The patented Re-Amp™ outputs emulate Les Paul™ or Strat™ pickups, providing the high impedance output a guitar amp needs. 

The rear panel offers no less than nine outputs: balanced and unbalanced XLRs, balanced and unbalanced 1/4" phone jacks, an audiophile headphone output, plus two Re-Amp outputs. Polarity reversal and multiple ground lifts make it easy to minimize hum and noise.

Input channels magnify the signal by as much as 1000:1. There's no "Undo" after this point. Coloration or distortion become part of the signal. Millennia's unique designs avoid circuit-induced artifacts, giving you total control. Amplify the original sonic information with an absolute minimum of alteration, or apply tonal shading so natural and translucent that it seems to become an integral element of the source itself.

Features

* Four distinct inputs can be optimized for any source
Instruments - Twin Topology® DI channel; vacuum tube or discrete solid state
Microphones - discrete solid state HV-3 microphone preamplifier
DAW or tape outputs - Discrete solid state line level amplifier
Guitar power amp outputs - Speaker Soak™ technology
* Powerful yet musical tonal shading
* Two bands of mastering-grade NSEQ-2 parametric Eq
* Optimized DI input for any instrument with variable 470 k / 2 M / 10 M impedance
* Nine outputs for unlimited functionality
* Patented Re-Amp outputs emulate Les Paul® and Strat® pickups
* Audiophile headphone output
* Balanced and unbalanced monolithic outputs
* Balanced and unbalanced discrete FET outputs
* Microphone level output with large-geometry DIT-01 transformer
* Effortlessly musical performance at all dynamic levels
* Input headroom >100 V, output headroom > 30 V
* 100% effective hum removal with numerous ground lifts & isolations
* Built for critical professional applications
* Ultra-clean toroid power supply: internal sub-chassis
* Gold connectors, OFC audio wiring, silver Teflon power wiring

Specification

Preamplifiers

* Instrument / DI Input Amplifier Twin Topology®
* TUBE: Selected twin triode vacuum tube amplifier (200 V)
* SOLID STATE: Selected all discrete J-FET amplifier (50 V)
* THD + Noise20 Hz - 30 kHz (35 dB Gain)0.0005% typical mic / line, 0.03% typical vacuum tube
* Intermodulation Distortion 0.0009% typical mic / line, 0.03% typical vacuum tube
* Frequency Response @ -3 dB points 3 Hz to 300 kHz, typical. Varies with routing & topology
* Maximum Balanced Line Input Level+23 dBu (+43 dBu with Pad engaged or >110 Volts rms)
* Maximum DI Input Level (Both Tube & SS)+18 dBu (+26 dBu with Pad engaged or >15 Volts rms)
* Maximum Output Level+32 dBu active balanced outputs, +26 dBu unbal outputs
* Maximum System Gain45 dB standard (65 dB with optional HV-3 mic preamp)
* Input Impedance (DI)Switchable: 470 kilohms / 2 megohms / 10 megohms
* Noise (Mic) (60 dB gain)-128 dB EIN, 150 ohm source, -130 dB EIN common source
* Noise (Line) (10 dB gain)-105 dBu
* Noise (DI) (10 dB gain)-90 dBu (solid state)
* Phase Error (EQ out)Less than +/- 5 degrees 50 Hz to 20 kHz

Parametric Equalizer

* Maximum Boost and Cut+/- 15 dB (21 step detent
* "Q" RangeQ+ 0.4 to 4.0 sweepable
* Low Freq sweepSwitch In: Pure Class-A Discrete J-FETs
* Hi Freq sweepSwitch Out: Pure Class-A Triode Tubes

Need Assistance? We're Here to Help!

Personalised Product Guidance

Whether you're seeking specific details about a product, or require advice on how it integrates with your existing setup, we're readily available to assist. Our team of specialists is on hand to help you make an informed decision.

Custom Solutions and Consultation

If you're unable to find the information you need on our website, or wish to discuss custom solutions, please feel free to contact us. We provide consultation services designed to assist you in creating an ideal audio environment.

Competitive Quotations and Pricing

In addition to personalised advice, we also offer quotations for our products and services. If you're planning a project or considering a purchase and have found a better price elsewhere, let us know. We strive to offer competitive rates and will do our best to accommodate your budget. Email us your requirements and we will provide a detailed quote to help you plan your investment with clarity and confidence.

Contact Us

Email us now for tailored advice, bespoke quotations, and solutions that respect your budgetary considerations. sales@giraffeaudio.com